Evinrude E60DGTL 60 HP E-TEC Outboard Motor

The Evinrude E60DGTL 60 HP Outboard Motor is a compact, high-output marine engine designed for boaters who need dependable propulsion, responsive performance and precise low-speed control.

Powered by an 863cc inline two-cylinder E-TEC Direct Injection engine, the E60DGTL delivers 60 HP while using Evinrude’s electronically controlled direct-injection technology. The engine operates across a 5,500–6,000 RPM full-throttle range and features a 2.9:1 gear ratio.

The E60DGTL configuration combines a 20-inch shaft, tiller steering, electric starting and power trim & tilt. Its graphite finish and approximately 250 lb / 113 kg weight make it a practical high-power option for appropriately rated aluminum boats, fishing boats, skiffs and other small-to-medium vessels.

Key Features

• 60 HP
• Evinrude E60DGTL
• E-TEC Direct Injection
• 2-cylinder inline engine
• 863cc displacement
• 2-stroke E-TEC design
• 20-inch shaft
• Tiller steering
• Electric start
• Power trim & tilt
• Mechanical controls
• 2.9:1 gear ratio
• 5,500–6,000 RPM full-throttle range
• 81A total alternator output
• 25A net dedicated battery charging output
• Multi-Point Targeted Oiling
• Graphite finish
• Approximately 250 lb / 113 kg

---

Evinrude E-TEC Direct Injection Engine

The E60DGTL uses Evinrude’s E-TEC Direct Injection technology.

The engine is an inline two-cylinder configuration with 863cc displacement, a 91 × 66 mm bore and stroke in the published specification, and a 5,500–6,000 RPM full-throttle operating range.

Unlike a conventional carbureted outboard, E-TEC technology electronically meters fuel directly into the combustion process.

Evinrude’s specification also identifies a stratified low-RPM combustion mode, designed to improve combustion control during low-speed operation.

---

60 HP Performance

With 60 HP available from an 863cc powerhead, the E60DGTL provides a strong power-to-size combination.

The engine’s relatively compact two-cylinder configuration makes it suitable for boat owners looking for substantial horsepower without stepping into the larger and heavier V6 outboard category.

The recommended full-throttle operating range is 5,500–6,000 RPM.

---

20-Inch Shaft

The E60DGTL uses a 20-inch shaft.

Evinrude’s model-specific specifications list the E60DGTL with a 20-inch / 508 mm shaft.

This makes it suitable for boats designed around a 20-inch transom.

Always verify your boat’s transom height and manufacturer’s maximum horsepower rating before installation.

---

Tiller Steering

The E60DGTL is the tiller-steering configuration of the Evinrude 60 HP lineup.

Evinrude’s specifications identify the E60DGTL with tiller steering, while the comparable E60DPGL and E60DSL configurations use remote steering arrangements.

Tiller steering provides direct control of throttle and steering at the engine, making the E60DGTL particularly attractive for fishing boats, utility boats and other applications where a traditional remote steering console isn’t required.

---

Electric Start

The Evinrude E60DGTL uses an electric starting system.

This provides convenient engine starting compared with manual-start configurations and is particularly useful for a 60 HP outboard.

The published technical specification identifies electric starting as standard for the E60DGTL.

---

Power Trim & Tilt

The E60DGTL features power trim and tilt.

The published specifications list a trim range of -4° to 16° and a tilt range of 65°.

Power trim allows the operator to adjust the engine’s running angle while underway, while power tilt makes it easier to raise the engine when needed.

---

High Electrical Output

The E60DGTL provides substantial electrical output for its engine class.

Evinrude’s published specifications identify 81 amps of total alternator output, with 25 amps of net dedicated battery-charging output.

This can be useful for boats equipped with compatible electronics, navigation equipment, fish finders and other electrical accessories.

---

Multi-Point Targeted Oiling

The E60DGTL uses Evinrude’s Multi-Point Targeted Oiling lubrication system.

The published specifications identify a 1.9-liter / 2-quart oil tank capacity and recommend Evinrude/Johnson XD-100 oil.

Because this is an E-TEC direct-injection two-stroke, the engine’s lubrication system is an important part of its design.

---

11. Evinrude E60DGTL Specifications

Specification	Details
Brand	Evinrude
Model	E60DGTL
Horsepower	60 HP
Engine Family	E-TEC
Engine Type	Inline 2-Cylinder E-TEC D.I.
Engine Cycle	2-Stroke
Displacement	863cc / 52.7 cu in
Bore × Stroke	91 × 66 mm
Fuel System	E-TEC Direct Injection
Low-RPM Combustion	Stratified
Full-Throttle RPM	5,500–6,000 RPM
Shaft Length	20 in / 508 mm
Steering	Tiller
Starting	Electric
Controls	Mechanical
Trim & Tilt	Power
Trim Range	-4° to 16°
Tilt Range	65°
Gear Ratio	2.9:1
Alternator Output	81A total
Net Dedicated Output	25A
Lubrication	Multi-Point Targeted Oiling
Oil Tank Capacity	1.9L / 2 qt
Recommended Fuel	87 Octane
Recommended Oil	Evinrude/Johnson XD-100
Weight	250 lb / 113 kg
Color	Graphite
Emissions	EPA / CARB 3-Star / EU