REPAIR & MAINTENANCE
Repair & Maintenance
Factory-Certified Service for Yamaha, Mercury, Suzuki & Honda
From routine oil changes to complex diagnostics, our technicians keep your outboard running at peak performance. Serving the San Francisco Bay Area.
Why Service With Aqua Marine Outboard?
Table
| What You Get | Why It Matters |
|---|---|
| Factory-Certified Technicians | Yamaha, Mercury, Suzuki & Honda certified. Trained on the latest EFI, digital rigging, and diagnostic systems. |
| Genuine OEM Parts | Factory-authorized parts protect your warranty and ensure proper fit and function. No aftermarket shortcuts. |
| Same-Day Diagnostics | Most problems identified within 1 hour. No waiting days to know what’s wrong. |
| Transparent Pricing | Estimate provided before work begins. No surprises, no hidden fees. |
| 90-Day Workmanship Warranty | Every repair backed by our guarantee. If we fixed it, we stand behind it. |
| Service Records Kept | Full maintenance history for warranty claims, resale value, and recall notifications. |
Routine Maintenance Services
Table
| Service | What’s Included | Interval | Est. Cost |
|---|---|---|---|
| Oil & Filter Change | Drain old oil, replace filter, refill with OEM-spec oil, inspect for contamination | 100 hrs or 1 year | $45–$85 |
| Gear Oil Change | Drain lower unit, inspect for water/metal, refill with marine gear lube | 100 hrs or 1 year | $25–$40 |
| Water Pump Impeller | Replace impeller and housing, inspect wear plate, test flow | 200 hrs or 2 years | $80–$150 |
| Thermostat Replacement | Test opening temp, replace if stuck or corroded | 200 hrs or 2 years | $30–$60 |
| Spark Plug Replacement | Remove, inspect, gap, replace with OEM plugs | 300 hrs or 3 years | $40–$80 |
| Fuel Filter Replacement | Replace 10-micron filter, inspect fuel lines, test for leaks | 100 hrs or 1 year | $15–$35 |
| Anode Inspection | Check wear, replace if <50% remaining, clean mounting surfaces | 50 hrs or 6 months | $15–$40 |
| Battery Service | Test voltage and load, clean terminals, check charging system | 50 hrs or 6 months | $0–$15 |
| Control Cable Lube | Disconnect, clean, lubricate, adjust tension | 100 hrs or 1 year | $10–$25 |
| Full 100-Hour Service | All of the above plus compression test, diagnostic scan, adjustments | 100 hrs | $300–$600 |
Diagnostic & Repair Services
Table
| Problem | Our Approach | Typical Cost |
|---|---|---|
| Won’t Start | Battery test, ignition check, fuel flow test, compression test, EFI fault code scan | $85–$200 |
| Overheating | Tell-tale flow check, impeller inspection, thermostat test, cooling passage inspection, pressure test | $100–$300 |
| Running Rough | Spark plug analysis, fuel system test, compression mapping, IAC valve cleaning, vacuum leak test | $100–$250 |
| Loss of Power | Fuel pressure test, propeller inspection, throttle linkage check, ECU limp mode diagnosis | $100–$250 |
| Vibration | Propeller balance and inspection, engine mount check, driveshaft inspection | $75–$200 |
| Fuel System Issues | Fuel pressure test, injector flow test, filter replacement, tank and line inspection, water contamination test | $100–$400 |
| Electrical Problems | Parasitic draw test, alternator output, gauge signal tracing, wiring harness inspection | $85–$250 |
| Trim/Tilt Failure | Hydraulic fluid check, pump motor test, relay bypass, ram seal inspection, bleed procedure | $100–$400 |
| Lower Unit Problems | Gear oil analysis, pressure test, prop shaft inspection, gear and bearing check | $100–$500 |
| Smoke / Excessive Oil Use | Compression test, leak-down test, valve seal inspection, ring wear assessment | $150–$400 |
Seasonal Services
Winterization — $200–$350
Summerization — $250–$450
Advanced & Specialty Repairs
Table
| Service | Description | Est. Cost |
|---|---|---|
| Lower Unit Rebuild | Complete gear, bearing, and seal replacement. 6-month warranty. | $800–$1,500 |
| Powerhead Decarbonization | Remove carbon deposits from pistons, valves, and combustion chamber. Restores compression and efficiency. | $300–$600 |
| ECU Reprogramming | Factory software updates, calibration, and performance tuning. | $150–$400 |
| Fuel Injector Service | Ultrasonic cleaning, flow testing, and seal replacement. | $50–$100 per injector |
| Hydraulic Steering Overhaul | Seal replacement, fluid flush, and pressure test. | $300–$800 |
| Control System Upgrade | Digital throttle and shift (DTS) installation and integration. | $1,500–$3,500 |
| Jack Plate Installation | Hydraulic or manual jack plate with full rigging. | $800–$2,000 |
Service Process
plain
STEP 1: BOOK YOUR SERVICE
Call +1 (415) 882-6561, book online, or walk in.
Describe the problem or service needed.
STEP 2: DROP OFF OR MOBILE SERVICE
Bring your boat/motor to 1428 Wallace Ave, San Francisco.
Or request mobile service (Bay Area, additional fee).
STEP 3: DIAGNOSTICS & ESTIMATE
We inspect, diagnose, and provide a written estimate.
No work begins without your approval.
STEP 4: REPAIR & TESTING
Factory-certified techs perform the work.
We test-run every motor before returning it.
STEP 5: PICKUP & WARRANTY
You receive a detailed invoice and service record.
All repairs carry our 90-day workmanship warranty.Service Pricing & Policies
Table
| Policy | Details |
|---|---|
| Diagnostic Fee | $85–$150 (applied to repair if you proceed) |
| Labor Rate | $125/hour for standard service |
| Mobile Service | $150/hour + travel (2-hour minimum) |
| After-Hours Surcharge | +$100 (10 PM – 6 AM) |
| Parts Markup | 15–20% over wholesale (industry standard) |
| Estimate Validity | 14 days |
| Payment | Due at pickup. Cards, cash, check accepted. Financing available for repairs over $500. |
| Cancellation | 24-hour notice required. Same-day cancellation may incur diagnostic fee. |
Service Warranty
90-Day Workmanship Warranty
Extended Service Plans
Book Service
Aqua Marine Outboard 1428 Wallace Ave San Francisco, CA 94124