Evinrude K150WXF 150 HP Outboard Motor | E-TEC G2

Power your boat with the Evinrude K150WXF 150 HP Outboard Motor, an E-TEC G2 outboard engineered to deliver strong performance, responsive control and efficient direct-injection operation.

The Evinrude K150WXF features an inline 3-cylinder E-TEC G2 engine with 1.9-liter displacement, direct fuel injection and a 5,000–6,000 RPM full-throttle operating range. The engine is equipped with electric start, power trim and tilt, and iSteer Dynamic Power Steering for precise control on the water.

This configuration uses a 25-inch shaft and is finished in Classic White. The K150WXF is designed for remote operation and features integrated iSteer Dynamic Power Steering. Official Evinrude/BRP specifications list the model at approximately 433 lb (196 kg). (Punto Mare)

Key Features

• 150 HP output
• Evinrude E-TEC G2 technology
• Inline 3-cylinder engine
• 1.9-liter / 114 cu in displacement
• Direct fuel injection
• Electric start
• iSteer Dynamic Power Steering
• Power trim and tilt
• 25-inch shaft
• Remote controls
• 5,000–6,000 RPM full-throttle range
• 2.08:1 gear ratio
• Classic White finish
• Approximately 433 lb / 196 kg
• Designed for single or multiple installation configurations

E-TEC G2 Direct Injection

The Evinrude E-TEC G2 engine platform uses direct fuel injection technology and stratified low-RPM combustion operation. This design was developed to provide responsive power delivery while maintaining efficient engine operation.

The K150WXF uses an inline 3-cylinder configuration with a 98 mm bore and 82.6 mm stroke. (Punto Mare)

iSteer Dynamic Power Steering

The K150WXF is equipped with iSteer Dynamic Power Steering, giving the operator precise steering control and helping make maneuvering a high-powered boat easier.

The K150WXF is the white, 25-inch configuration with integrated iSteer DPS and is listed for single or multiple installation applications. (Habro Systems)

25-Inch Shaft

The 25-inch shaft configuration makes the Evinrude K150WXF suitable for boats designed around a 25-inch transom.

Always verify your boat’s required shaft length, mounting configuration and steering compatibility before ordering.

Electric Start and Power Trim & Tilt

The K150WXF features an electric starting system and assisted trim and tilt. These features provide convenient engine starting and allow the operator to adjust the outboard’s running position to suit different operating conditions.

Evinrude K150WXF Specifications

Specifications should be verified against the documentation supplied with the specific engine because specifications and equipment can vary by model year or configuration. (Punto Mare)

Applications

The Evinrude K150WXF 150 HP Outboard Motor can be considered for appropriately rated:

• Fishing boats
• Bass boats
• Center-console boats
• Aluminum boats
• Offshore boats
• Recreational boats
• Family boats
• Performance-oriented fishing boats
• Commercial marine applications

Always confirm that your boat is rated for a 150 HP outboard and that the transom, steering system and controls are compatible.

Why Choose the Evinrude K150WXF?

The K150WXF combines 150 HP E-TEC G2 power, direct injection, electric starting, power trim and tilt, a 25-inch shaft and iSteer Dynamic Power Steering.

For boat owners looking for a powerful Evinrude 150 HP outboard with an integrated steering system and 25-inch shaft configuration, the K150WXF is a distinctive E-TEC G2 option.

Shop the Evinrude K150WXF 150 HP Outboard Motor today.